[問題]Apache2.2連線問題

edited 十月 2013 in 伺服器環境
Apache2.2可以執行,但是就是看不到網頁...保持在等待中...

已經載入PHP5.2 但是ext只有載入mysql

這部分也都沒問題。

防火牆則是沒開

不知道這問題到底是怎麼回事...好像以前也發生過,不知道怎麼解決。

麻煩告訴我應該怎麼解決這個問題...不勝感激。

原始討論: http://twpug.net/x/modules/newbb/viewtopic.php?topic_id=2259

評論

  • edited 十一月 2006
    也許需要多一點資訊才能回答你的問題吧
  • edited 十一月 2006
    #
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2/>; for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>;
    # for a discussion of each configuration directive.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "D:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
    # server as "D:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
    #
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths, however, to avoid
    # confusion.
    #

    # ThreadsPerChild: constant number of worker threads in the server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    ThreadsPerChild 150
    MaxRequestsPerChild 0

    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    #
    ServerRoot "D:/Program Files/Apache Software Foundation/Apache2.2"

    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
    #
    #Listen 12.34.56.78:80
    Listen 80

    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    #
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    #
    LoadModule actions_module modules/mod_actions.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule cgi_module modules/mod_cgi.so
    #LoadModule dav_module modules/mod_dav.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule deflate_module modules/mod_deflate.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule env_module modules/mod_env.so
    #LoadModule expires_module modules/mod_expires.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule headers_module modules/mod_headers.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule include_module modules/mod_include.so
    #LoadModule info_module modules/mod_info.so
    LoadModule isapi_module modules/mod_isapi.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule negotiation_module modules/mod_negotiation.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule speling_module modules/mod_speling.so
    #LoadModule status_module modules/mod_status.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule userdir_module modules/mod_userdir.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    #LoadModule ssl_module modules/mod_ssl.so

    LoadModule php5_module "D:/Program Files/php/php5apache2_2.dll"
    AddType application/x-httpd-php .php
    PHPInidir "D:/Program Files/php"

    # 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #

    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    #
    ServerAdmin [email protected]

    #
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    #
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #
    ServerName gai00.no-ip.org:80

    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "D:/Program Files/Apache Software Foundation/Apache2.2/htdocs"

    #
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    #
    # First, we configure the "default" to be a very restrictive set of
    # features.
    #
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    Satisfy all
    </Directory>

    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #

    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory "D:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

    </Directory>

    #
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    #
    <IfModule dir_module>
    DirectoryIndex index.html index.php
    </IfModule>

    #
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    #
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    </FilesMatch>

    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog logs/error.log

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    <IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access.log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access.log combined
    </IfModule>

    <IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http:///bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "D:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"

    </IfModule>

    #
    # "D:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "D:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>

    #
    # Apache parses all CGI scripts for the shebang line by default.
    # This comment line, the first line of the script, consists of the symbols
    # pound (#) and exclamation (!) followed by the path of the program that
    # can execute this specific script. For a perl script, with perl.exe in
    # the C:\Program Files\Perl directory, the shebang line should be:

    #!c:/program files/perl/perl

    # Note you _must_not_ indent the actual shebang line, and it must be the
    # first line of the file. Of course, CGI processing must be enabled by
    # the appropriate ScriptAlias or Options ExecCGI directives for the files
    # or directory in question.
    #
    # However, Apache on Windows allows either the Unix behavior above, or can
    # use the Registry to match files by extention. The command to execute
    # a file of this type is retrieved from the registry by the same method as
    # the Windows Explorer would use to handle double-clicking on a file.
    # These script actions can be configured from the Windows Explorer View menu,
    # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
    # button allows you to modify the Actions, of which Apache 1.3 attempts to
    # perform the 'Open' Action, and failing that it will try the shebang line.
    # This behavior is subject to change in Apache release 2.0.
    #
    # Each mechanism has it's own specific security weaknesses, from the means
    # to run a program you didn't intend the website owner to invoke, and the
    # best method is a matter of great debate.
    #
    # To enable the this Windows specific behavior (and therefore -disable- the
    # equivilant Unix behavior), uncomment the following directive:
    #
    #ScriptInterpreterSource registry
    #
    # The directive above can be placed in individual <Directory> blocks or the
    # .htaccess file, with either the 'registry' (Windows behavior) or 'script'
    # (Unix behavior) option, and will override this server default option.
    #

    #
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain

    <IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>

    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    #MIMEMagicFile conf/magic

    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    #
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http:///subscription_info.html
    #

    #
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #
    #EnableMMAP off
    #EnableSendfile off

    # Supplemental configuration
    #
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.

    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf

    # Multi-language error messages
    #Include conf/extra/httpd-multilang-errordoc.conf

    # Fancy directory listings
    #Include conf/extra/httpd-autoindex.conf

    # Language settings
    #Include conf/extra/httpd-languages.conf

    # User home directories
    #Include conf/extra/httpd-userdir.conf

    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf

    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf

    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf

    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf

    # Various default settings
    #Include conf/extra/httpd-default.conf

    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    #
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    #
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
  • edited 十一月 2006
    [Sun Nov 12 07:49:43 2006] [notice] Apache/2.2.3 (Win32) PHP/5.2.0 configured -- resuming normal operations
    [Sun Nov 12 07:49:43 2006] [notice] Server built: Jul 27 2006 16:49:49
    [Sun Nov 12 07:49:43 2006] [notice] Parent: Created child process 420
    [Sun Nov 12 07:49:43 2006] [notice] Child 420: Child process is running
    [Sun Nov 12 07:49:43 2006] [notice] Child 420: Acquired the start mutex.
    [Sun Nov 12 07:49:43 2006] [notice] Child 420: Starting 150 worker threads.
    [Sun Nov 12 07:49:43 2006] [notice] Child 420: Starting thread to listen on port 80.
  • edited 十一月 2006
    沒有其他的錯誤訊息出現。

    詳細的情況就是
    1.PNG
  • edited 十一月 2006
    抱歉,內容很多...(沒修改沒刪除權限)

    圖片沒縮

    上面的圖片就是一直卡在那邊

    就算放著一整天 還是卡在那邊
  • edited 十一月 2006
    一點建議,如果你的焦點是學會 PHP ,那麼也許可以將手動安裝的環境先行移除,用 XAMPP 建置基本環境作為開始:
    http://twpug.net/x/modules/news/article.php?storyid=94

    我已經很久沒有手動安裝各種必要環境,因此幫不上忙
  • edited 十一月 2006
    用127.0.0.1可以瀏覽嗎?
    我通常在Windows下的開發環境是不會指定Server Name來瀏覽的,所以不太清楚你的問題跟那個有沒有關系。
  • edited 十一月 2006
    還是沒辦法XD"

    我有用過 localhost 和 127.0.0.1測試過了

    所以基本上和防火牆沒有任何關係

    也和網路本身沒有關係

    我也有把PHP刪掉,用很乾淨的2.2.3版本測試過,一樣打不開XD"

    我開始懷疑是這個版本的BUG或者是和windows不合
  • edited 十一月 2006
    我想起來了,你把這段:
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    Satisfy all
    </Directory>

    改成:
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    #Order deny,allow
    #Deny from all
    Satisfy all
    </Directory>

    這樣就可以了~
  • edited 十一月 2006
    一樣不行...

    不知道問題到底是出在哪裡=x=|||

    就算用#也一樣執行正常,但是就是不能開...

    難道還是卡在防火牆!?

    可是2.0版本沒這個問題說...

    就連我把防火牆關掉也一樣...
  • edited 十一月 2006
    想請問一下,有哪邊的論壇或者Blog可以讓我發問?

    說不定其他地方有人知道怎麼解 =x=|||

    (說不定是我網路問題,目前還沒有看到Google上面有和我相同問題的。)
  • edited 十一月 2006
    我把我目前用的http.conf 給你比對看看。
    我目前用這個設定確定可以正常執行,要注意的是安裝路徑跟網站的路徑,你要根據你的環境去修改。


    #
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2/>; for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>;
    # for a discussion of each configuration directive.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "C:/Program/Apache Software Foundation/Apache2.2" will be interpreted by the
    # server as "C:/Program/Apache Software Foundation/Apache2.2/logs/foo.log".
    #
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths, however, to avoid
    # confusion.
    #

    # ThreadsPerChild: constant number of worker threads in the server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    ThreadsPerChild 250
    MaxRequestsPerChild 0

    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    #
    ServerRoot "C:/Program/Apache Software Foundation/Apache2.2"

    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
    #
    #Listen 12.34.56.78:80
    Listen 80

    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    #
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    #
    LoadModule actions_module modules/mod_actions.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule cgi_module modules/mod_cgi.so
    #LoadModule dav_module modules/mod_dav.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule deflate_module modules/mod_deflate.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule env_module modules/mod_env.so
    #LoadModule expires_module modules/mod_expires.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule headers_module modules/mod_headers.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule include_module modules/mod_include.so
    #LoadModule info_module modules/mod_info.so
    LoadModule isapi_module modules/mod_isapi.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule negotiation_module modules/mod_negotiation.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule speling_module modules/mod_speling.so
    #LoadModule status_module modules/mod_status.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule userdir_module modules/mod_userdir.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    #LoadModule ssl_module modules/mod_ssl.so

    LoadModule php5_module D:/Program/php/php5apache2_2.dll
    AddType application/x-httpd-php .php
    PHPIniDir D:/Program/php
    UserDir D:/Website

    # 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #

    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    #
    ServerAdmin [email protected]

    #
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    #
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #
    ServerName 127.0.0.1:80

    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "C:/Program/Apache Software Foundation/Apache2.2/htdocs"

    #
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    #
    # First, we configure the "default" to be a very restrictive set of
    # features.
    #
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    # Deny from all
    Satisfy all
    </Directory>

    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #

    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory "C:/Program/Apache Software Foundation/Apache2.2/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

    </Directory>

    #
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    #
    <IfModule dir_module>
    DirectoryIndex index.php index.htm index.html
    </IfModule>

    #
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    #
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    </FilesMatch>

    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog logs/error.log

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    <IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access.log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access.log combined
    </IfModule>

    <IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://127.0.0.1/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/Program/Apache Software Foundation/Apache2.2/cgi-bin/"

    </IfModule>

    #
    # "C:/Program/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "C:/Program/Apache Software Foundation/Apache2.2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>

    #
    # Apache parses all CGI scripts for the shebang line by default.
    # This comment line, the first line of the script, consists of the symbols
    # pound (#) and exclamation (!) followed by the path of the program that
    # can execute this specific script. For a perl script, with perl.exe in
    # the C:\Program Files\Perl directory, the shebang line should be:

    #!c:/program files/perl/perl

    # Note you _must_not_ indent the actual shebang line, and it must be the
    # first line of the file. Of course, CGI processing must be enabled by
    # the appropriate ScriptAlias or Options ExecCGI directives for the files
    # or directory in question.
    #
    # However, Apache on Windows allows either the Unix behavior above, or can
    # use the Registry to match files by extention. The command to execute
    # a file of this type is retrieved from the registry by the same method as
    # the Windows Explorer would use to handle double-clicking on a file.
    # These script actions can be configured from the Windows Explorer View menu,
    # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
    # button allows you to modify the Actions, of which Apache 1.3 attempts to
    # perform the 'Open' Action, and failing that it will try the shebang line.
    # This behavior is subject to change in Apache release 2.0.
    #
    # Each mechanism has it's own specific security weaknesses, from the means
    # to run a program you didn't intend the website owner to invoke, and the
    # best method is a matter of great debate.
    #
    # To enable the this Windows specific behavior (and therefore -disable- the
    # equivilant Unix behavior), uncomment the following directive:
    #
    #ScriptInterpreterSource registry
    #
    # The directive above can be placed in individual <Directory> blocks or the
    # .htaccess file, with either the 'registry' (Windows behavior) or 'script'
    # (Unix behavior) option, and will override this server default option.
    #

    #
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain

    <IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>

    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    #MIMEMagicFile conf/magic

    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    #
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://127.0.0.1/subscription_info.html
    #

    #
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #
    #EnableMMAP off
    #EnableSendfile off

    # Supplemental configuration
    #
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.

    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf

    # Multi-language error messages
    #Include conf/extra/httpd-multilang-errordoc.conf

    # Fancy directory listings
    #Include conf/extra/httpd-autoindex.conf

    # Language settings
    #Include conf/extra/httpd-languages.conf

    # User home directories
    #Include conf/extra/httpd-userdir.conf

    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf

    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf

    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf

    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf

    # Various default settings
    #Include conf/extra/httpd-default.conf

    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    #
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    #
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
  • edited 十一月 2006
    我已經換回Apache2.0版本了...可以跑

    會不會是XP SP2有點不相容?

    你的設定擋還是感謝了,因為以後我還是想換到Apache2.2去...

    有些功能我想要用,在此先謝謝了。
Sign In or Register to comment.